The sound of silence: How to design a quiet home office

(BPT) – In today’s increasingly digital world, it’s no surprise that more employees are opting to work from home. While there may be a shift of physical locations — from the office building to the home — productivity is still paramount, making the need for quiet home workspaces more important than ever.

“As urbanization continues, builders and developers are focused on optimizing available land, which results in more homes, apartments and condos built near highways and airports,” says Mark Montgomery, vice president of marketing for leading window manufacturer Ply Gem Windows. “The convergence of telecommuting and higher noise levels means there’s a growing need to enhance homeowner comfort with noise reduction technology.”

If your workspace needs a sound makeover, consider the following tips. For even more information on home improvement solutions, check out websites like www.plygem.com.

Think from the outside in

Everyday sounds like traffic, trains, leaf blowers, music, barking dogs or car alarms may go unnoticed on the weekends, but can easily interrupt conference calls and concentration during the busy workweek.

To cut down on outside noise, look for windows with Sound Transmission Class (STC) rating. A typical single hung window unit without sound control glass has an average STC rating of 27. Sound control glass packages, on window lines like Ply Gem’s 1500 Brickmould Vinyl Collection, have ratings of up to STC 35. This reduces outside noise by approximately 40 percent when compared to single hung window units with no protection.

“STC glass packages may not be necessary for every window in the home, but should be considered for the rooms where the reduction of unwanted noise is most important — like the home office and bedrooms,” advises Montgomery.

As an added bonus, according to the Department of Energy, new windows will boost curb appeal, reduce maintenance and can significantly improve your home’s energy efficiency.

Insulate the interior … and the exterior

If your home office space shares a paper-thin wall with, for instance, a loud family room television, adding batt wall insulation for new homes, or blown-in insulation for existing homes, will help blanket sounds and temper vibrations.

For homes that face busy roadways, insulated vinyl siding is another solution. Look for options made with a premium, recycled-content vinyl siding panel permanently bonded with polystyrene (EPS) foam insulation. This wraps the home with continuous insulation to cover the entire exterior envelope — including wall studs where air and sound can penetrate.

Another quick fix for insulating the home office is to install a solid core wood or molded interior door. Many standard interior doors are hollow, which means that sounds pass through more easily. Solid core doors, which are thicker than hollow doors, act as a noise blocker. Once installed, make sure to surround the door with weather-stripping to fill any holes or gaps.

By keeping these tips in mind, you’ll be well on your way to creating a quiet home office retreat and defending your workspace from unwanted interruptions.

Facebooktwitterredditpinterestmail

Leave a Reply