6 Steps to the Perfect Limewashed Brick Backsplash

a

Limewashed brick is popular these days. The unique, distressed look it produces is classic, and goes so well in many different decor styles.

Courtney Clymer, who writes Lifestyled Atlanta, wanted to create her own limewashed brick backsplash in her kitchen. She gave it a go, and discovered it’s a surprisingly easy look to achieve.

Limewashed Brick Backsplash DIY

Here’s how I limewashed a brick backsplash surface using Bianco Antico Limewash. I was SO surprised at how easy it was– it took me less than a few hours, and it was actually much easier than painting.

Below you see our old kitchen backsplash. We decided to remove all the cabinets from this side and add a range hood, plus open shelving for a more open feel in our galley kitchen.


First, we put up a brick backsplash. We used this brick tile, which comes in sheets, making it super easy to install.


Here’s a step-by-step of the limewashing process.

Step 1

Mix 1 part limewash + 1 part water in a bucket and get a spray bottle full of water.

Step 2

Spray the brick with water to dampen it.

I did this in sections, so it wouldn’t dry by the time I got to it with the paint brush.


Step 3

Apply the limewash to the dampened section with a masonry brush, working it into the grout lines and brick

Step 4

Move from section to section, letting the paint dry for about 20 minutes.


Step 5

Spray the water on, section by section again, and use a rag or towel to rub off the limewash in various areas. I rubbed at different corners, middle pieces, etc. for an imperfect look– rubbing harder on some areas than others.


Step 6

Finally, we caulked around the edges as a finishing touch (and of course we taped the edges off with painter’s tape.)


I wanted an overall white effect, so I repeated this entire process three times to make my limewashed brick backsplash extra white.

If you want more color to show through, you may only need to do it once or twice.

Browse The Home Depot’s Paint Department¬†and Stone Veneer section for the materials needed in this DIY limewashed brick backsplash project.

Check out more DIY projects here on The Home Depot Blog.

The post 6 Steps to the Perfect Limewashed Brick Backsplash appeared first on The Home Depot Blog.

Facebooktwittergoogle_plusredditpinterestmail

Leave a Reply